​​This hull form has generous chine beam moderate dead-rise, with a fine entry developing into straight buttock lines in the aft sections. The bottom is also slightly convex in section athwartship further enhancing the sea keeping performance. This in my opinion is the most efficient hull form for this configuration, which has been reinforced by the vessel’s performance.

The hull also incorporates my standard silent chine arrangement. As there is no chine flat entering the water this eliminates chine slap at rest yet retains a dry soft ride while under way. The hull is further assisted by one lifting strake per side positioned below the static waterline running through to the transom.

Careful attention has to be paid to the weight of the vessel, so for the structure we chose a balsa cored epoxy composite for the hull with foam utilized in the cabin structure and lightweight cored products for the interior joinery.

Specifications

Design name Elite 13m Sports Sedan
Builder Scott Lane Boat Builders
Construction Epoxy Timber Composite
LOA 12.8m
Beam 4.3m
Draft 1.1m
Displacement 10 200kg (Loaded)
Sprint speed 26.5kt*
Cruise 20kt*
Fuel capacity 1200L
Water capacity 900L
Power Single Cummins QSB  480hp

 

*with quoted HP

Contact us for more information
about the design above